Airgoons
Landinggoons.jpg BMS.png
DCS.png

Flaming Cliffs 3

From Airgoons
Revision as of 14:42, 12 June 2018 by Tippis (talk | contribs) (Created page with "{{RightImg|https://www.digitalcombatsimulator.com/upload/iblock/30a/DCS_FC3_cover-2014_eng.jpg}} {{Main|Lock_On:_Modern_Air_Combat|Lock On: Modern Air Combat}} In the beginni...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
[[1]]
Main article: Lock On: Modern Air Combat

In the beginning, there was Lock On: Modern Air Combat (LOMAC), and it was… well, it was decent enough. Already back then, Eagle Dynamics had chosen the Black Sea as their primary campaign area and they included a reasonably wide variety of aircraft in different roles.

When a planned LOMAC expansion eventually became the basis for a complete revamp and re-release of the simulator in the form of DCS World, the work done on those original aircraft was not to be wasted. Instead, they were transformed into simplified, lower-fidelity playable aircraft models for DCS and were released as a package under the moniker Flaming Cliffs 3.

Included aircraft

The following aircraft are part of the FC3 collection:

Note that, while technically not a part of the FC3 package since it comes included with the free DCS World client, the Su-25T should also be considered an “FC3-style” aircraft in terms of flight and systems modelling. Also note that the J-11 can only be obtained as part of the FC3 package, not as an separate module (not that anyone should ever buy these aircraft separately).

Flight models

Whereas the regular aircraft in DCS use a professional flight model and advanced systems modelling, the FC3 aircraft are modelled at varying lower degrees of detail and fidelity. Three (and a half) different flight models are available: [1]

  • Standard Flight Model (SFM). A data- and scripting-driven flight model that was used in the Lock On series and is still used in the MiG-29.
  • Advanced Flight Model (AFM) and AFM+. A flight model that uses force application and calculation on the relevant flight surfaces. This simulates edge of envelope conditions well and avoids scripted behaviors as used in an SFM. AFM+ adds limited modelling of hydraulic and fuel systems.
  • Professional Flight Model (PFM). This flight model uses wind tunnel data, moving part kinematics, and simulations of airflow as well as the influence of, for instance, hydraulic, electric, and fuel systems on flight dynamics.
A-10A Advanced Flight Model (AFM+)
F-15C Professional Flight Model (PFM)
J-11 Professional Flight Model (PFM)
MiG-29 Standard Flight Model (SFM)
Su-25 Advanced Flight Model (AFM+)
Su-25T Advanced Flight Model (AFM)
Su-27 Professional Flight Model (PFM)
Su-33 Professional Flight Model (PFM)

Systems modelling

In addition to the various flight models, the FC3 aircraft use Standard Systems Modeling (SSM) as opposed to the Advanced Systems Modeling (ASM) of the more complex modules. This means that only cockpit systems essential for flight, navigation, and combat are directly simulated. These systems are controlled through direct keyboard or button binds, rather than through mouse interactions with simulated switches in the cockpit.

Among other things, this means that the FC3 aircraft do not offer any kind of emergency or recovery procedures. Fires or loss of control surfaces cannot be addressed — rather, the pilot can only hope to be able to return to base and land with degraded controls before the aircraft crashes or blows up. For an more critical faults, ejecting is really the only option.

Links and files

References