Airgoons
Vipergoons.jpg BMS.png
DCS.png

Yak-1 series 69: Difference between revisions

From Airgoons
Jump to navigation Jump to search
No edit summary
()
Line 12: Line 12:
== Out of combat ==
== Out of combat ==
=== Startup and taxi ===
=== Startup and taxi ===
 
*RPM, mixture 100%.
 
*Throttle 10-15%.
*Begin engine startup sequence.
*For taxiing, you can unlock the tailwheel to make tighter turns. Be aware that the plane then is highly unstable.
=== Takeoff ===
=== Takeoff ===
 
*Open the radiators for the initial climb to altitude: oil at around 40%, water at around 55%.
*Smoothly throttle up to full power.
*Use '''left''' rudder to keep the plane straight.
*Takeoff speed is just under 200km/h.
*Once airborne, reduce mixture to 85-90%.
=== Climb ===
=== Climb ===
 
*Pitch trim to achieve the desired attitude.
*Keep an eye on your oil and water temperature and adjust the radiator flaps if necessary.
*Dont forget to shift your supercharger gear at 2300m.
*Start leaning the mixture slightly as you go past 3000m.
=== Cruise ===
=== Cruise ===
 
*Pitch trim to achieve the desired attitude.
*Keep an eye on your radiator temperature and adjust the radiator flaps if necessary. You may need to close them more than you think!
*If you wish to save fuel, lean your mixture until your exhaust is no longer sooty.
*With a steady throttle, adjust RPM until manifold pressure is highest. This is 2550 RPM at sea level. This will give you the highest possible speed at the cost of some acceleration.
=== Landing ===
=== Landing ===
 
*Extend flaps below 120mph.
*Landing speed is around 80mph.
*After touchdown, let the plane roll for a little while before applying the brakes.


== In combat ==
== In combat ==

Revision as of 15:48, 9 June 2021

The Yakovlev Yak-1 series 69 is a fighter from the Battle of Stalingrad module of IL-2 Sturmovik: Great Battles.

Hangar view

Yak-1.jpg

Important facts and figures

Engine management

Airspeed considerations

Flying the Yak-1

Out of combat

Startup and taxi

  • RPM, mixture 100%.
  • Throttle 10-15%.
  • Begin engine startup sequence.
  • For taxiing, you can unlock the tailwheel to make tighter turns. Be aware that the plane then is highly unstable.

Takeoff

  • Open the radiators for the initial climb to altitude: oil at around 40%, water at around 55%.
  • Smoothly throttle up to full power.
  • Use left rudder to keep the plane straight.
  • Takeoff speed is just under 200km/h.
  • Once airborne, reduce mixture to 85-90%.

Climb

  • Pitch trim to achieve the desired attitude.
  • Keep an eye on your oil and water temperature and adjust the radiator flaps if necessary.
  • Dont forget to shift your supercharger gear at 2300m.
  • Start leaning the mixture slightly as you go past 3000m.

Cruise

  • Pitch trim to achieve the desired attitude.
  • Keep an eye on your radiator temperature and adjust the radiator flaps if necessary. You may need to close them more than you think!
  • If you wish to save fuel, lean your mixture until your exhaust is no longer sooty.
  • With a steady throttle, adjust RPM until manifold pressure is highest. This is 2550 RPM at sea level. This will give you the highest possible speed at the cost of some acceleration.

Landing

  • Extend flaps below 120mph.
  • Landing speed is around 80mph.
  • After touchdown, let the plane roll for a little while before applying the brakes.

In combat

Overall

Strengths

Weaknesses

Flying against the Yak-1

Do this

Do not do this

Modifications

Rivet counting

IRL History